Opening Hour

Mon - Sun, 08:00 - 24:00

Call Us

+86-21-58386189

ISSN:, Effect of ...

ISSN:, Effect of ...

+

The M35 concrete with steel slag partial replacement for fine aggregate are examined in the present study. According to material properties compressive strength, flexural strength and split tensile strength were found experimentally. The results were compared with conventional concrete property.

EFFECT OF PARTIAL REPLACEMENT OF SAND BY IRON SLAG .

EFFECT OF PARTIAL REPLACEMENT OF SAND BY IRON SLAG .

+

of using iron slag as partial replacement of sand in concrete. Iron and steel making slag are by products of the iron making and steelmaking processes. To date, these types of slag have been widely used in cement and as aggregate for civil works. The report presents an investigation of mechanical and durability properties of concrete by adding iron slag as replacement of sand in various percentages.

INTERNATIONAL JOURNAL OF CIVIL ENGINEERING .

INTERNATIONAL JOURNAL OF CIVIL ENGINEERING .

+

cement 0 to 30%. Compressive strength of Steel slag concrete with different dosage of slag was studied as a partial replacement of cement. From the experimental investigations, it has been observed that, the replacement of Steel Slag Powder to cement without changing much the compressive strength is 17%.

reusability of steel slag as partial replacement of cement ...

reusability of steel slag as partial replacement of cement ...

+

partial replacement of cement with steel mill replacement of sand in concrete with slag and mill scale ISSN 3221 5687, (P) 3221 568X An experimental, An experimental investigation on partial replacement of steel slag and steel millscale, slag and mill scale, concrete with steel slag and millscale aggregates ...

Utilisation of silica fume steel slag in concrete as a ...

Utilisation of silica fume steel slag in concrete as a ...

+

To increase the strength of concrete by partial replacement of coarse aggregate with steel slag which is a waste material produced from steel industries. The main objective of this project is to get high strength by using normal mix proportions with partial replacement of silica fume in cement and steel slag .

JournalNXTHE EFFECT OF FERROCHROME SLAG AS PARTIAL ...

JournalNXTHE EFFECT OF FERROCHROME SLAG AS PARTIAL ...

+

journalnxthe effect of ferrochrome slag as partial replacement of cement in concrete Concrete is the second mostused material in the world after water. In 21st century, world is progressing at a ...

STUDY ON STRENGTH PROPERTIES OF CONCRETE USING .

STUDY ON STRENGTH PROPERTIES OF CONCRETE USING .

+

STUDY ON STRENGTH PROPERTIES OF CONCRETE USING GGBS AND STEEL FIBER AS PARTIAL REPLACEMENT OF CEMENT DHANYA R 1, ARASAN 2*, GANAPATHY RAMASAMY 2 1Assistant professor, Department of civil engineering, SRM University, Chennai, India 2Postgraduate, Department of civil engineering, SRM University, Chennai, India (Received 17 June, 2017; accepted .

Utilisation of silica fume steel slag in concrete as a ...

Utilisation of silica fume steel slag in concrete as a ...

+

Steel slag was used as an aggregate replacement in conventional concrete mixes. Steel slag which is mainly consists of calcium carbonate is produced as a by .

Viability of Slag on The Strength Of Concrete, A Review

Viability of Slag on The Strength Of Concrete, A Review

+

slag as a partial replacement of aggregate increases the strength in concrete than the normal concrete. Conclusion On the basis of the existing review of literature it can be concluded that the strength increases at an increasing rate up to 30% use

EXPERIMENTAL STUDY ON STRENGTH OF CONCRETE USING .

EXPERIMENTAL STUDY ON STRENGTH OF CONCRETE USING .

+

slag and different % of steel fibres as a partial replacement of OPC. The cement in concrete is replaced accordingly with the percentage of 20% by weight of slag and % by weight of steel fiber. Concrete Samples are tested at the age of 7,14 and 28 days of curing. Finally, the strength performance of slag blended fiber

Determination of Mechanical Properties of EOF Steel Slag ...

Determination of Mechanical Properties of EOF Steel Slag ...

+

0% to 100% partial replacement of fine aggregate with Energy Optimized Furnace (EOF) Steel Slag with an increment of 10%. Destructive testing method is carried out by crushing of concrete and NDT method is done by Ultrasonic Pulse Velocity (UPV) and Rebound Hammer (RHT) tests. The relationship between the result of the non

Study on Strength Properties of Concrete by Partially ...

Study on Strength Properties of Concrete by Partially ...

+

concrete. II. WHAT IS STEEL SLAG material for replacement of fine aggregate in concrete Steel slag is a byproduct obtained either from conversion of iron to steel in a Basic Oxygen Furnace (BOF), or by the melting of scrap to make steel in the Electric Arc Furnace (EAF). These impurities consist mainly of carbon in the form

Strength Properties of Steel Slag in Concrete

Strength Properties of Steel Slag in Concrete

+

0% to 20% and achieved a maximum value at a replacement of 30% Steel slag in fine aggregate afterwards decreased for 40% replacement of steel slag. • However compressive strength of concrete for the partial replacement of Fine aggregate with Steel slag of 40% does not show major decrement as compared to 30% and can be use by control mix.

Technical Assessment on Performance of Partial .

Technical Assessment on Performance of Partial .

+

Technical Assessment on Performance of Partial Replacement of Coarse Aggregate by Steel Slag in Concrete Prof. Warudkar Abhijit, Mr. Nigade 1Prof, 2Student, JSPM'S ICOER Wagholi,Pune. India as aggregates in asphalt paving road mixes .

An Experimental Study on Partial Replacement of Fine ...

An Experimental Study on Partial Replacement of Fine ...

+

2) Utilization of steel slag in concrete as a partial replacement material for fine aggregate Authors: kothai, A comprehensive study of the potential health risks Associated with the environmental application (eg.

Aperformance Study On Partial Replacement Of Steel Slag .

Aperformance Study On Partial Replacement Of Steel Slag .

+

concrete this prepared with steel slag as a partial replacement of sand in three different proportions 10%, 20%, 30% and tested for the period of 7days, 14days, 28days curing. This compressive strength compared with the conventional concrete concrete prepared without steel slag.